- Unlock Frp Samsung 8
- Samsung S8 Frp Unlock Z3x
- Unlock Frp Samsung S8 Screen
- Unlock Frp Samsung S8 Max
- Unlock Frp Samsung S8
Once the phone connected with computer, Click on “Start Button” from Odin and wait until the Unlock FRP from Samsung S8 or S8 Plus first update completes. Just after few minutes, In Odin the status will indicate “PASS!” with big green button.
Hello and welcome to our latest #GalaxyS8 troubleshooting page for the day. This post addresses the common issue regarding Factory Reset Protection as well as other boot problems. We hope you’ll find our solutions helpful.
If you are looking for solutions to your own #Android issue, you can contact us by using the link provided at the bottom of this page.
When describing your issue, please be as detailed as possible so we can easily pinpoint a relevant solution. If you can, kindly include the exact error messages you are getting to give us an idea where to start. If you have already tried some troubleshooting steps before emailing us, make sure to mention them so we can skip them in our answers.
Below are specific topics we’re bringing for you today:
Problem 1: Galaxy S8 stuck in Samsung logo screen
Hi. I have a Samsung Galaxy S8 bought off someone on the app OfferUp. It barely turn on. It doesn’t function correctly. When it does turn on, it’s stuck on the “Samsung Galaxy S8 Powered By Android” screen and if I try doing safe mode or hard reset, it goes back to the previous screen. There was a time where it went to system update but it quickly turned off. The phone doesn’t charge so I assume it needs a new battery. Only functions while plugged in.
Charging symbol comes up occasionally when plugged in but shows no sign of actual charging. No LED lights. I’d appreciate it if you could give me some pointers on what to do. If not, I’d understand. Thank you. — Angel Diaz
Solution: Hi Angel. First of all, something or a lot things must not be right in your device. All these symptoms are usually the result of a hardware malfunction although in some cases, they can also be due to a software glitch. If the phone has no physical damage, never dropped, or got wet, then you’ll probably be able to fix this problem by reflashing the bootloader. However, if the phone had been physically impacted and you did not chose to tell us about it, stop wasting your time browsing our blog. Instead, we strongly suggest that you send the phone in so it can be repaired or replaced.
Since your S8 no longer boots normally and factory reset does not do anything, the only software trick that you can try at this time is to reflash the bootloader to stock. Once you’ve done, you can then flash a stock firmware to the device as well.
Flashing procedures vary by device and phone models so be sure to do more research. Below are the typical steps on how to flash the bootloader of a Galaxy device. The exact ones for your particular S8 may be slightly different.
- Look for the correct firmware for your phone model and download it. Make sure that you select the right one. It should be the same exact firmware that ran previously on your device. We assume that you list down the firmware version somewhere. If you did not take note of it before, there’s a chance that you may pick the wrong one. As you may know now, using an incorrect firmware can cause complications so good luck with that.
- Let’s now say that you have identified the correct firmware. You then want to download it to your computer. The firmware file should have a bunch of files in it like AP_, BL_, CSC_, etc.
- Look for the file that starts with a label BL; this should be the corresponding bootloader file for this firmware. Once you’ve identified the bootloader file, copy it to your computer’s desktop or to any other folder that you can easily access.
- Proceed with the rest of the flashing procedure using the Odin program.
- In Odin, click on the BL tab and make sure to use the bootloader file you’ve identified earlier.
- Now, make sure that the “Device Added” status and its “ID:COM box” has turned blue before hitting the START button. This will initiate the flashing of your phone’s bootloader.
- Restart the phone once the procedure is finished.
Remember, if reflashing the bootloader and/or installing stock firmware won’t help, you’re out of luck. There must be a hardware-related cause that prevents your phone from booting up properly. Send it to Samsung or to an independent service center to be checked.
Problem 2: Galaxy S8+ won’t load normally, stuck in apps is optimizing screen
Hi. I own a Samsung Galaxy S8+, which is one-month old. Today i don’t know what happened to it but it certainly got switched off and when i press the power key the phone get started. Then the security pattern page showed. After that, the page appeared the next page showed was Android app is optimising. but after optimising all the apps in the phone it is not starting and stuck to that page only..i left it for more than 30 minutes but still got no response from the phone.. i am in a fix please help me and tell me what to do as i have tried your solution of soft reset, safe mode and also cleared cache partition..i have only not tried to master reset my phone feared that all my valuables photos an other things will got lost and also my warranty will get void.. please help what to do. Thank you. — Md Shafique
Solution: Hi Md Shafique. You really have to no choice but to try factory reset/master reset at this time. An issue like yours usually happen if the system fails to load the operating system properly. We don’t know what happened to your device prior to problem so we can’t say for sure what’s behind this trouble. We know how inconvenient it is to lose files but if your phone won’t boot normally, there’s no way to get them back anyway. Go ahead with factory reset and see what happens. If the phone remains stuck, or continue its bootloop cycle, you should have it repaired or replaced.
Here are the steps on how to master reset your phone:
- Back up data on the internal memory. If you have signed into a Google account on the device, you have activated Anti-theft and will need your Google credentials to finish the Master reset.
- Turn off the device.
- Press and hold the Volume Up key and the Bixby key, then press and hold the Power key.
- When the Android logo displays, release all keys (‘Installing system update’ will show for about 30 – 60 seconds before showing the Android system recovery menu options).
- Press the Volume down key several times to highlight “wipe data / factory reset.
- Press Power button to select.
- Press the Volume down key until Yes — delete all user data is highlighted.
- Press Power button to select and start the master reset.
- When the master reset is complete, Reboot system now is highlighted.
- Press the Power key to restart the device.
Problem 3: Galaxy S8 locked out due to Factory Reset Protection, How to bypass FRP
I have a Samsung Galaxy S8 phone. Recently I did a factory reset on my phone. now when I tried to switch it on it is asking me to enter my Google account but unfortunately I can’t remember my Google account and is not letting me enter into my phone. I just want my phone to come back on. I really don’t want this Google account activation as I tried enter my gmail it still don’t work enough. please can you help me. — Jubz
Unlock Frp Samsung 8
Solution: Hi Jubz. Starting with Android 5.0 (Lollipop), Samsung devices has become more difficult to factory reset or wipe. This is because of the new security feature called Factory Reset Protection or FRP. FRP will make it hard for an unauthorized user to use the phone after a factory reset since the device will now ask for the registered Google account for the phone. Unfortunately, this same protection can also be a significant headache for legitimate users who may have forgotten their Google credentials. At this time, there’s no option for a legitimate owner of the device to authenticate himself or herself to be allowed access to the phone. This means that unless you try harder to remember what your Google account username and password are and enter them in the device, there’s just no way to use your phone again. Even sending the device to Samsung is futile as Samsung won’t unlock your device for you.
Samsung S8 Frp Unlock Z3x
When FRP was released over a year ago, there were a few unofficial means to bypass it. Samsung eventually got wind of them and right now, we are not aware of any effective method to bypass FRP but this video may help. We haven’t tried the process suggested in the said video ourselves so do it at your own risk.
The good thing is, FRP is just a software restriction so there will always be brilliant minds out there that will eventually figure out ways to defeat it. Try searching the web for possible solutions.
Unlock Frp Samsung S8 Screen
Problem 4: Galaxy S8 accidentally dropped won’t turn on
Unlock Frp Samsung S8 Max
Hello. My S8 is brand new, it fell screen down on the floor, not from a big height though. I saw the back key and the other key lit up and now i don’t see them, only the blue light is lighted up. I tried your method of holding the volume up key + power on + home for 20 secs did not do anything. I don’t wanna lose my phone as I have all my data on the SD card. Please help me 🙁 — Ash
Unlock Frp Samsung S8
Solution: Hi Ash. If the phone was working normally before you accidentally dropped it, then you clearly have a hardware issue now. Our suggestion of booting the phone to Recovery Mode by doing the hardware button combination of volume up, power, and home keys, are meant to check if you’ll still be able to turn the phone on and perform a factory reset. If the phone refuses even to power on at this time, there’s no amount of pressing and holding of hardware buttons that you can do to make it to work. The drop must have damaged the battery or the motherboard that it can’t even manage to power on the device right now. Be sure to contact Samsung so they can check the hardware or replace the entire unit.